What was Jesus’ basic message and mission an Example by

What was Jesus’ basic message and mission Introduction Many people tried to ask themselves these questions; who was Jesus, his role and his mission? But they could not get answers to them. Some people believed Jesus was the Son of God while others believe he was the son of a carpenter- Joseph. These people could not just understand how a virgin woman could give birth to a baby. The Romans did not understand why he preached about the word of god who was unknown to them. They opposed his teachings because they thought that they posed a great danger to the future of the Roman Empire. They wondered on what capacity he preached to the multitudes to repent their sins so that they could be heirs to the kingdom of heaven. In this essay, I will critically look at exactly who was Jesus Christ, his role here on earth and his mission and Ill try to unravel all these mysteries. Need essay sample on "What was Jesus basic message and mission" topic? We will write a custom essay sample specifically for you Proceed First, Jesus said that he came to seek and save the sinners but he did not come for the holy ones. Thus, he was only concerned with those who were not yet saved from these eternal miseries. He also preached that he did not come to seek earthly values but for the kingdom of heaven. He did this by telling people that the sinners will face their punishment of eternal sufferings while the righteous will be the heirs to the kingdom of heaven, which in other words meant eternal happiness. Jesus preached that he was the truth and the only way through which you could acquire the kingdom of heaven. He tried to convince people to leave their sinful ways and stop valuing earthly belongings for neither of them would let them be the heirs of heavens. He did this by preaching about humbling yourself, helping the needy and being selfless. The poor people who had nothing to lose warmly embraced the message he conveyed to the multitude. But to the rich who were being challenged by this message felt that the teachings were meant to eliminate them. Thus they started opposing and criticizing these teachings. This is what eventually culminated in to his betrayal and finally the crucification. In his message, he greatly criticized and attacked some behaviour, which were being practiced by some religious fellows. At one time he complained of people having made the temple of the lord a market place and he was forced or he felt much obliged to whip them out of the church. Those who benefited from those immoral activities felt that Jesus and his mission were against them so, they resulted to open hostility against him and his teachings as well as all his followers. Because of the failure of the roman leaders to understand the character of Jesus Christ and his role in the world, the Roman governor -Pilate was easily convinced that Jesus who claimed to be the son of God and his followers or disciples were against him and could soon terminate his kingdom. Thus, the Roman Empire ordered him to be arrested, tortured and then crucified on the cross. In his preaching, Jesus had already prophesied that one of his disciples would betray him to be crucified and that after the third day; he would rise from his grave and ascend to heaven. This was something that was believed by his followers. What the Romans wanted was to verify whether these claims were true or false. Even one of them said, Truly this was the son of god. He said this when the earth shook and lights disappeared when he was dying. Everything that had been prophesied occurred. This is today what forms the basis of Christianity. The values of Christianity were different from those of the pagan Roman world in that the Romans were brutal and appeared to be uncivilized. This was evident by the way the enslaved prisoners of war and sinners were punished but according to the Christianity they were expected to forgive and treat their neighbors. Also, whereas the Romans joined the combat so that they could earn their living, Jesus preached against these earthly values. The Romans were of this principal-an eye for an eye or a tooth for a tooth. This maxim was similar to the Law of Moses but was contrary to principle of Christianity, which stated that you should forgive those that do you wrong. It is evident that there was a difference in values because when a highway robber that was said to have mugged a man was killed. This was an act of revenge. In the Roman Empire there were two categories or classes of people- upper class and lower class. This was a thing that was perpetuated by the Roman laws. The upper class wanted to preserve their status quo were opposed to the idea of losing earthly belongings, which was being preached by the Christians. In the Christians view, all people were equal in the eyes of God. So, the idea of classes was foreign to them. There were various reasons why the Romans felt that Christianity threatened them. First it is because they knew that if they accepted Christianity then they would cease being leaders and start following Jesus Christ. Also they were not happy because of the way many people had joined Christianity and thus stopping being royal to the Roman government. They knew that no leader could ever claim to be great if he cannot command a big following. Thus, they realized that the only way of reversing the situation was by checking the spread of Christianity. These teachings of loving your neighbor, helping the sick and the needy ones were totally different from those of the roman pagans who were insensitive to the needs of others. Thus, they saw this as a challenge that would bring a revolution to their empire if it was let to prosper. According to Romans, private affairs were not encouraged whereas the Christians led life of privacy. They refused to mix with others freely. Romans being inhuman saw this. The roman pagans were also threatened because Christians were against the idea of worshipping gods. Christians believed only in one God thus, they refused to bow down to the roman gods. Christianity came with the birth of Jesus Christ. Despite the resistance that it met in the Roman Empire, it spread and eventually brought the pagan empire down. The teachings of Christ crashed with those of the Romans. For example, Christians believed in eternal life, no value for earthly kingdom, humbleness and forgiving those who do wrong to us. All these were contrary to those of the Romans who believed that there was nothing like eternal life. To them there was nothing like forgiving and they wanted to preserve their status quo. Jesus was believed to have come to save the sinners, a sentiment that was not shared by the Romans. His teachings which were greatly embraced by the poor did not amuse the rich who felt that they would lose their properties thus they misled The Roman Governor Pontius Pilate to order for his arrest and crucification on the cross. After the death of Christ death, Christianity as a religion became stronger but it was on the verge of dying when Apostle Paul came to its rescue. Initially Paul was called Saul because he used to persecute Christians but later he stopped this. Paul believed that the kingdom of heaven belonged to those who needed it and that there would be a judgment day when sinners and the righteous would be judged. According to Zambus Inc, The foundations of western civilization in the ancient world, a diary 164, Seneca tries to describe the gladiatorial shows that were held in the Roman Empire. The gladiators at first they were either criminals or prisoners of war. Later, even free men started to participate because of poverty. These freemen sought for formal training in public institutions like schools. In his diary, Seneca talks of how he chanced to go to the arena to relax his mind when he witnessed a dangerous game where murder was the ultimate goal. Men wore no fighting costumes and every blow was leveled on a bare body. He says that the Roman society was brutal. Men were made to face wild animals like lions and bears, at noon they were made to face their fellow men and spectators really derived joy from these games. The result of every game was death of humans. Seneca also gives an eye account of how men shouted at a man who was said to be a robber who used to mug people on the highways. People wanted him to be punished by death. They were saying that if he killed people, he too should be killed. He likened these shows to a market where people exchanged vengeance for vengeance as if they were commodities. People wanted no other form of entertainment apart from watching men die. After one game was over they begged for other men to be put in the death chamber- arena, they only dreamt of seeing blood shed. According to Seneca, this was how the Roman society was. They were used to this kind of life. In the foundations of western civilization in the ancient world- Christians in the Roman Empire, Zambus inc, letter Pliny the Younger who was a governor to the Roman Empire was writing to the emperor Trajan to notify him of his policies and to seek for some advice concerning the Christian who denounced them. Zambus Inc166, Pliny describes to Trajan the process he follows in making his decisions. He says that if a victim is said to have denounced him, he first of all tries to establish whether he is a Christian or not. If the victim confesses it, he repeats the question again threatening him by death. If the victim still insists that he/she is not ready to change his stand then, he ordered him/her to be executed or killed. He also says than even Roman citizens who became Christians also faced the same punishment. This letter, which was sent to Trajan by Pliny the Younger, was much appreciated by Trajan who positively recommended the punishment. He goes ahead to thank him for being innovative inventing new laws. Trajan does this by telling Pliny that it is hard to have fixed standards at all times. Trajan emphasizes that if they are found guilty, they must be punished but if they denounce Christianity and prove it then, on the grounds of repentance they should be should be pardoned or excused Trajan also emphasized that no information whatsoever would be accepted if it had no accusers name attached to it. Such information should not be acted upon. In conclusion we have seen how the Romans lived, behaved and treated their fellow Christians. They tried very hard to suppress Christianity but finally they were defeated. The Romans were totally inhuman to Christians. During their reign most Christians were persecuted but this did not deter them from moving on. Reference: Zambus Inc, The Foundations of Western Foundations in the Ancient World

John Locke and Jean-Jacques Rousseaus Views on Private Prop essays

John Locke and Jean-Jacques Rousseaus Views on Private Prop essays In the sixteen to nineteenth centuries, philosophers such as John Locke and Jean-Jacques Rousseau had clearly opposing opinions on the European settlement of the Native American inhabitation; this was due to their very distinctive notions on private property. These settlers found in North America a largely uncultivated and undeveloped territory; here savages lacked an elaborate concept of private property in land. Rousseau believes that even the Native Americans have a deep capacity to become corrupt, for all societies have this tendency. Locke sees the stipulation and function of society to protect property as something sacred to mankind, while Rousseau perceives property as the root of the corruption and ultimate disgrace of society. Locke was in defense of this European settlement and appropriation of land; while Jean-Jacques Rousseau would seemingly oppose the European settlement. Rousseau and Locke both appropriately distinguish the derivation of property to be grounded in m ans natural desire to improve his life, but they differ in their portrayal of the result of such a desire. Although Rousseau addresses fascinating conceptions of private property, Locke will ultimately prove that private property is vital and has a positive effect on mankind. In order to examine either philosophers views on property and its origins, it is necessary to go back to the most primitive human development, and discuss their different conceptions of the state of nature. We must consider what state all men are naturally in, and that is, a state of perfect freedom...A state also of equality, wherein all the power and jurisdiction is reciprocal, no one having more than another. (Locke, Second Treatise, II.4). According to John Locke, man is bound by a distinct law of nature in this state of liberty, which diktats that all men are bound to preserve himself, and...to preserve the rest of Mankind. (Se...

The U.S. Financial Crisis- Impact on Trade Research Paper

The U.S. Financial Crisis- Impact on Trade - Research Paper Example As a result of the crisis starting in 2007 and building up by 2008, the Wall Street could be said to have been remade (Jones, 2009, p.2).     The Financial Crisis of 2007/2008: The international trade and the economic growth in the world had presented significant positive results before the economic crisis of 2007/2008. From the time period from 2000 till 2007 the gross domestic product of the world had reflected an increase of 3.2 percent in a year that surpassed the annual growth of the 1990s that figured around 2.5 percent. Countries like China, India, and Russia that were emerging as economic countries in the market also reflected expansions in their growth to as high as 6.5 percent in a year resultant of the different economic reforms. The farmers in the U.S. also benefitted from these growths leading to rising farm income of around 43 percent. The financial crisis affected the world starting in 2007 and deepening in 2008 leading to recession in several countries (Appendix A ) (Liefart & Shane, 2009). The crisis had initiated in the US when the housing bubble burst out and there were increasing defaults in mortgages, particularly in the subprime mortgages, that had grown for the borrowers who were not worthy of such loans, thereby leading to instability in the financial institutions and subprime losses (Appendix B) (Helleiner, 2011, p.69). The different causes that were obtained to have led to the crisis include: imprudent mortgage lending relaxing the standards of lending, housing bubble reflecting rising prices of houses, global imbalances, securitization, lack of transparency and responsibility in mortgage finance, rating agencies giving AAA ratings to several downgraded securities, mark to market accounting, deregulatory legislation, shadow banking system with financial activities moving out of government safety, non bank runs, off balance sheet financing, subprime lending mandated by government, failure of risk management systems, financial innovat ion, complexities, human infirmity, bad models of computer, excess leveraging, relaxed regulation of leverages, credit default swaps, over the counter derivatives, fragmented regulation, no systemic regulation of risks, short term incentives, and tail risk (Jickiling, 2010, pp.5-10). These issues initiated in the US and gradually affected the world and the international trade. With the crisis deepening in 2008, various measures that imposed restrictions on trade activities were initiated by different countries. General hikes in tariffs, particularly in iron and steels, primary products, agricultural foods, were incorporated in countries like Russia, India, Turkey, Vietnam, Ukraine, EU, Brazil, and Ecuador. Standards and certifications in trade also changed in several countries like Malaysia, India, Indonesia, Ecuador, Thailand and South Korea with bans and restrictions on several business issues. Licensing system of imports also altered from ‘free’ to ‘restrictedà ¢â‚¬â„¢ in many countries as a result of the recession.  Ã‚  

ESPN Assignment Example | Topics and Well Written Essays - 500 words

ESPN - Assignment Example The augmented product is ESPN’s continuous improvement related to its contents as well as delivery. This means that the customers can trust ESPN for getting them deep insights and sports news from a new perspective. 2. ESPN has strong and dominating brand equity. Over the years ESPN has not only strengthened its customer base, but also has been able to instil an enviable brand loyalty, as is clearly reflected in the fact that ESPN is able to charge a premium that is well above its competitors’. This strong presence of brand equity readily translates into ESPN’s brand value as is evident in the statistics shown the case: that it is not only is a $6 billion company, but also contributes a significant 20% amount in its parent company, Walt Disney’s kitty. Risks: the only risk is that the traditional consumers who love watching ‘live’ sports action might get confused with this kind of brand extension promoting ‘gaming’ and not a real ‘sport’. Benefits: The AOL website reaches out to a very large consumer base, including those who do not have time to spend in front of their TVs (Dempsey, 2008). By streaming ESPN videos online, the channel can target this whole new consumer base. 4. ESPN has done very well in developing its brand through a variety of clever strategies. It has successfully explored a large bouquet of media to reach its consumers. From traditional television through cable, radio and print media to DTH, telephony, mobile services, internet, ESPN has been able to have a wide reach in its audience. Also its co-branding strategies have been very effective and mutually beneficial for all partners. As far as possible future brand developments are concerned, I think that ESPN should make its presence even more prominent in developing gaming software for various available platforms, such as, tablets, mobiles, etc. Also it should make

Human Resource Development Essay Example | Topics and Well Written Essays - 5500 words

Human Resource Development - Essay Example The following discussion presents a detailed account of how firms shape and re-invent their HRD policies in conformity with their business requirements and what processes are the most crucial for survival in an environment where a competitive advantage is the only way to survive in the market. The paper also contextualizes the various learning and developmental activities that international firms take up in the attempt to brace with the changing business climates and the paper provides a brief outline of the HRD processes implemented by two international organizations in their various international business units. Strategic steps for human resource development are among the most crucial decisions that organizations take as these decisions usually are the critical factors which determine not only the effectiveness, but also the efficiency of the organization and its workforce in the long run. The initiatives that are taken for developing systematic HRD plans pay out for organizations because they bring together the development of employee‘s competence , the development of a shared vision of the business and the various business strategies employed so that they are aligned together to provide maximum benefit to both the employees and the employer. For a business operating in more than one country, the dilemmas regarding HRD and HRM strategies are numerous and varying in their degree of influence on the organizational success, however, since organizational effectiveness is a key component which drives the need to have any such strategy to begin with, these dilemmas pose a serious question for all such organizations. This paper has tried to evaluate the major forces which drive organizations to bring about a change in their management philosophies and how these changed perspectives affect the Human resource development policies of these firms. This paper aims to evaluate the impact of management ideals and strategic decision making on the

Advantages and Disadvantages of Infrared Touch Screen

Advantages and Disadvantages of Infrared Touch Screen Touch-screen is an electronic visual display that can find the existence and location of a touch inside the display area. The term just like direct to touching the display of the device with a hand or finger. Touch-screens can also fell other passive objects, such as a stylus. But, if the object find is animate, as a light pen, the term touch-screen is usually not applicable. The touch-screen has two main characteristically. First, touch-screen applies one to interaction straightly with what is showed, instead of indirectly with a cursor controlled by a mouse or touchpad. Second, touch-screen lets one do so without demand any intermediate device that would require to be maintain in the hand. This display can be close to computers or to networks as a terminal. They also perform as an outstanding role in the design of digital tackles such as the PDA (personal digital assistant), satellite navigation devices, mobile phone, video games and etc. (Dictionary of Architectural and Building Technology 4 Edition, 2004) History In 1971, the first touch sensor was exploited by Doctor Sam Hurst (founder of Elographics) at the time he was an instructor at the University of Kentucky. He had given this sensor a name, Elograph, been patented by The University of Kentucky Research Foundation. Dr. Sam Hurst (left) the founder of Touch-screen. (Elotouch, 2009) The Elograph was not transparent like modern touch screens; but it was a distinguished landmark in touch screen technology. In 1974, the first really touch screen bring in a transparent surface was exploited by Sam Hurst and Elographics. In 1977, Elographics exploited and patented five-wire resistance technology, the most popular touch-screen technology use today. Touch-screens firstly obtained some visibility with the creation of the computer-assisted learning terminal, which are come out in 1975 as a part of the PLATO project. Soon afterwards, touch-screens have become intimate in daily life. Most of the companies use touch-screens for kiosk system in retail and travel settings, POS system, ATMs system, PDAs, with a stylus is sometimes used to control the user interface or to enter data. The prestige of smart phones, PDAs, portable game console and varies types of information appliances is manipulation the requirements for, and accepting of touch-screens. The first touch-screen on the world, Elograph. (Elotouch, 2009) From 1979-1985, the Fairlight CMI (and Fairlight CMI IIx) was a high-end musical sample and resynthesis workstation that exploit light pen technology, with the user would distribute and control sample and synthesis data, as well as feeder different menu within its OS by touching the screen with the light pen. The latest Fairlight series III models, the place of light pen had used a graphics tablet. The HP-150 from 1983 was the one worlds earliest commerce touch-screen computer. The touch-screen monitor didnt have a touch-screen in the strict sense; while it had a 9 inch Sony Cathode Ray Tube (CRT) encircled by infrared transmitters and receivers, which are controlled by the position of any non-transparent objects on the screen. Until nowadays, most consumer touch-screens can only sense one point of contact at one time, and some had the ability to sense how hard one is touching. This is the time to make changes with the commercialization of multi-touch technology. Touch-screens computer are popular used in hospitality, and in heavy industry, as well as kiosks such as museum displays or room automation, where normal computer input device such as keyboard and mouse do not allow a suitable intuition, fast response, or accurate interactive by the user with the displays content. Historically, the touch-screen transducer and its accompanying controller-based firmware have been made available by a wide array of after-market system integrators, and not by display, chip, or motherboard manufacturers. Display and chip manufacturers worldwide have recognition the tendency in regard to accepting of touch-screens as a highly advisable user interface module and have began to integrate touch-screen feature into the main design of their products. (Elotouch, 2009) Touch-screen Technologies I have read many journals and search from the internet about this topic, and I found that there have variety types of touch screen technology using in different area start from 1971. Below is the type of touch-screen technology. Resistive Resistive touch-screen panel is build up of some layers, the most important layers of the resistive touch-screen panel which are two thin, that is metallic and electrically conductive layers dissociate by a narrow disparity. When an object, like a finger or a light pen, check down on a point on the resistive touch-screen panels outward surface, the two metallic layers will become as a connected at that point: the panel will conducts as a pair of voltage dividers with connected outputs. This is because a change in the electrical current, which is enroll as a touch incident and sent to the controller for processing. Surface acoustic wave Surface acoustic wave (SAW) technology is using ultrasonic waves to pass through the touch-screen panel. When an object like finger or light pen touched the panel, a part of the wave is absorption. This transform in the ultrasonic waves registers the situation of the touch incident and forwards the information to the controller for processing. Surface acoustic wave touch screen panels can be damaged by foreign elements. Pollutants on the surface will be also interfering with the function of the touch-screen. (Touch System 2009) Capacitive A capacitive touch-screen panel constitute of an insulator such as glass, spread with a transparent conductor like ITO (indium tin oxide). As we know, human body also is a conductor, with using human body touch the surface of the screen contents in a distortion of the bodys static electricity part, measure as a transform in electric capacity. Different technologies may be used to define the position of the touch. The position is use to send information to the controller for processing. (I-techcompany, 2009) Surface capacitance Surface capacitance in the basic technology, only have one side of the insulator is spread with a conduct electricity layer. A small voltage is utilized to the layer, effecting in an identical static electricity part. When a conductor, like a humans finger, touches at the uncoated surface, capacitor is the formation of dynamic. The touch-screen sensors controller can define the position of the touch indirectly from the transform in the capacitance as measured from the each nook of the panel. As the surface capacitance has no moving fields, it is moderate degree durable but has finite resolution, is tend to fake semaphore from parasitism capacitive coupling, and requires adjustment during fabricate. Therefore, it is most frequently used in basic applications such as kiosks and industrial controls. (I-techcompany, 2009) Projected capacitance Projected Capacitive Touch (PCT) technology is a capacitance technology which excises more preciseness and quick operational, by etching the conduct electricity layer. An X-Y gridiron is formation whether etching a single layer to form a gridiron method of electrodes, or by etching two part, vertical layers of conduct electricity material with parallel lines or tracks to form the grid (compare to the pixels gridiron found in variety of LCD displays). The greatest resolution of PCT giving permission to manipulate without direct connection, so the conduct electricity layers can be spread with further conservative insulator layers, and running indeed under screen protectors, peradventure back weather and vandal-proof mirror. Proper to the peak layer of a PCT entity mirror, PCT is a better right measure answer to resistive touch technology. Fell back on the execution, an active or passive stylus can used to cover for or in enhance to a human body, finger. This is familiar with POS equipment that demands to the signal that snatches up. Gloved fingers can or cant be perceived, fell back on the execution and obtain settings. Smudginess on the conductor it can impede with the performances. The example of the smudginess on the conductor mostly come from rheumy or sweatiness fingers cusp, especially in high wateriness circumstance. Collected dust, which adhesively on the surface relevant to the hydrosphere from finger cusp also will be a p roblem. The two types of PCT: Self Capacitance and Mutual Capacitance. (Planarembeddred, 2010) Mutual Capacitance The capacitor at every junction of each column and each row, it is Mutual Capacitive sensors. In a 12-by-20 array, for example, it would have 240 self-governed capacitors. Voltage is appliance to each row or each columns conductor. Bringing a human body like finger or conductive stylus contiguous to the exterior of the sensor transforms the local static domain which recede the mutual capacitance. The capacitance transforms at each of the singlehanded conductor on the lattice can be estimate to exactly mensuration the sense the position by determine the voltage in the each datum line. Mutual capacitance empowers multi-touch control where multi-ply fingers, thenar or stylus can be exactly follow up the scent at the same time. (Planarembeddred, 2010) Self Capacitance Self capacitance sensors actually same like mutual capacitance sensors, both of them have same horizontal and vertical grid but the rows and column each is operate autocephaly. Self capacitance can able to load a human body like finger and light pen on each row or each column electric pole by a electrical current meter. The advantages for this method is it able to engender a strongest signal compare with mutual capacitance, but the disadvantages is it cant accurately resolve more than one finger, as a result in ghosting, or mislay position catching. (Planarembeddred, 2010) Infrared The infrared touch-screen uses an array of X-Y infrared light-emitting-diode (LED) and photo detector to match circumambience border of the interface to find out an interrupt in method of the LED horizontal beam. The main advantage for this system is it able to detect basically of any input, comprising a human body, finger, glove finger, stylus or a pen. Infrared touch-screen is ordinary widely used in outdoor application; ATM and point-of-sale (POS) system which are unable depend on a bare finger to activating the touch-screen. Infrared touch-screen is different with the capacitive touch-screens, it doesnt need any fix design on the glass to increasing the durability and optics perspicuity of the entirely system. (I-techcompany, 2009) Strain gauge The configuration of the strain gauge, also known as the strength of panel technology, the screen is spring-mounted at the four corners and strain gauges are installed to determine the deflection during the screen is touched. This technology has been existed from 60 years since the 20th century, but Vissumo and F-Origin have to make new feature in the business possible solution. Strain gauge also able to measures the Z-axis and the strength of a persons touched. This screen is usually used to expose the public system, for example ticket machines due to its obstruction to damage. (Wisegeek, 2010) Optical imaging Optical imaging is a more modern evolution touch-screen technology, it able to capture two or more image sensors which are placed around the border of the screen. An infrared back lights was install in the camera scene which are used to capture the images on the other side of the screen. Each of the touch will display as a shadow and the task for the camera is use to triangle and locates the touch or even step to the size of the touching object. Optical imaging is a technology which growing in prestige, because to its scalability, multifunction, and affordability, mostly for a buff units. (Wisegeek, 2010) Dispersive signal technology Dispersive signal technology was release in 2002 and introduced by 3M, this touch-screen is using the sensors to determine the mechanical energy on the screen that occurrence because to a touch. This technology is using intricacy algorithms to explanation the information offering the actual position of the touch. The most powerful feature for this technology is its wont compensation to be unaffected by dist or dust and any other external elements, such as scratches. This technology doesnt have any additional element adding on the screen but it also enable to provide a distinction optical clarity. Apart from that, the mechanical vibration is using to determine a touch happening, any device also able use to engender such happening, such as human body, finger and also stylus. The disadvantages for this technology are the system is unable to determine a stirless finger after the initial touch. (Wisegeek, 2010) Acoustic pulse recognition Acoustic pulse recognition was release in 2006 and introduced by Tyco Internationals Elo division, this technology was using piezoelectric sensors situated at several locations which are around the screens and use to convert the mechanical energy of a touch, also call as vibration into an electronic signal. This technology screen hardware is same like dispersive signal technology which are using algorithm to detect the actual position of the touch depend on the sensors signal. The generally material to made the touch-screen is glass, it will giving the touch-screen a good durability and optical clarity. Whatever the screen is full with scratches or dust, this technology also able to perform with a good accuracy. Besides that, this touch-screen technology is also good fit to demonstrates that are physical larger. A system which are installing with a dispersive signal technology, the system is unable to determine a stirless finger after the initial touch. But with the same reason above , identification is not interrupt by any remaining objects. (Wisegeek, 2010) Construction There are a lot of majors methods to develop a touch-screen. The mains purpose for the touch-screen is to detect one or more finger or stylus which are touching on a display screen and use to constructing the pragmatic sanction that are representative, also use to convey the pragmatic sanction to the suitable system. For the most popular touch-screen technology, which is capacitive and resistive approach, both of them are usually built by four layers; 1st layer The upper polyester layer spread with a transparent coherer conductive which is spread on the bottom of the layer. 2nd layer This layer is as a spacer which is built by adhesive. 3rd layer The main material for this layer is glass; we also call this layer as glass layer. Transparent coherer conductive is also spread on the top of the layer. 4th layer Another name for this layer is adhesive layer, it used on reverse side of the glass layer for the installation. When the touch-screen system detects a touch, the system will record all the changes that occur on electrical current which are work through the display or screen. One of the touch-screen technologies which are develop by 3M in 2002, dispersive-signal technology, this technology is focus on piezoelectric effect. This technology will generate the voltage during the mechanism force is exploit to a materials, a chemically situation will happen during a reinforce screen substrate is touches. There are two type of the infrared-based approaches touch-screen technology. One of them, it is using an array of sensor to determine the actual position where a human body, finger is touching or almost touching to the display or the screen, accordingly use to blocking the light beams projected cross over the display. Another infrared-based touch-screen technology is operate with a infrared cameras which is install on the bottom layer of the screen and use to record each of the touch which are happen on the display or screen. In each of the situation, the touch-screen system will detect each of the meaningful pragmatic sanctions depends on the operation which is display on the screen during the time and the actual position of the touch. (Ipod Touch Fans, 2010) Development Practically each of the distinguished touch-screen technology patents were submitted in the 1970s and 1980s and already expired. Touch-screen package manufacturing and goods programming is no more guarantee by royalties or legitimacy with concerning to patent and nowadays the manufacturing extensive applying touch-screen technology display on several types of devices. The evolvement of multitasking of touch-screen convenience is used to tracking touching by one or more than one human body, finger or stylus on the screen, therefore the touch-screen operations that need more than one finger are probability. Besides that, this touch-screen devices support more than one user to interaction with the touch-screen at the same times. Nowadays, there are a lot of products is apply with the high-tech and integrate touch-screen technology in the world. With the fast growing and acceptance by public, the inconsequential cost for the touch-screen technology is consuetude draw into the device that is included touch-screen technology and is potentially eliminated. As generally happen with any technology before, touch-screen technology include software and hardware have sufficiently ripped and was perfectly survive in the world over more than thirty years based on the point which is its reliability is certify. There is why, nowadays so many system or product are applied with touch-screen technology, such as Global Positioning System (GPS), airplanes, mobile phone, gaming console, ticketing system, machine control system, utensil, and each type of handheld devices. With the influence of the touch-screen technology, Apple Inc. has developed a mobile phone which is fulfilling with multi-touch technology and gives it a name as iPhone. By the releases of the iPhone, it had motivated the touch-screen mobile phone market and with the estimate it had bring in around US$5 billion in 2009. The capability of the touch-screen technology to preciseness location of the point on the screen itself is also advancement with the rising of graphics tablet or screen hybrids. (Wikipedia, 2010) Ergonomics and usage From the journal Prometheus Critical Studies in Innovation, 2007, which are publisher by Routldge, I founded there are many ergonomics and usage about touch-screen. As following: Finger Stress Touch-screen technology has an ergonomic trouble and become a stress on human fingers for them which are during a user employed more than a few minute at a time, from important overwhelming force can be needs for some types of touch-screen. As we know, nowadays touch-screen technology already as a craze technology and continues to growing, therefore the community is going through a lot more finger pressure. There have a lot of ways to emission this problem, such as some of the users will use a pen or some other devices to add exploit and more preciseness on the pointing. The exploitation of this kind device cans sometimes giving trouble, which are according to the required use. For example, public kiosks like ATM machine. Fine motor control is better realizing working with a stylus. That is because a human finger is a quite wide and careless pointing of connecting with the touch-screen itself. (Prometheus Critical Studies in Innovation, 2007) Fingernail as Stylus From a science novelette short story Scanners Live in Van which is written by Cordwainer Smith (Pen Linebarger) in 1950, it is mentioning about using fingernail as stylus for easier typing. The idea of using fingernail as a stylus pruned to from a point on the screen, to be particularly used as a stylus on writing screen for communication. These ergonomics problem of immediacy touching can be bypass by using a distinct skill, provided that the user fingernail are either short or long. Instead of touching by using soft skin of an extended fingernail, whatever the finger is curly but the top of the fingernail are able be used instead. From the underneath, the thumb finger is optional used as a supporter for the user finger or for the user who have long fingernails. This method is work on most touch-screen technology, but it didnt work on capacitive touch-screens. As we know, fingernails are hard, bending appearance contact the screen at a very small point. So, the finger just needs a much less for touching, even bigger accurateness is probable (propinquity that of a stylus, with a little bit of experience), not to mention skins oil will spread on the screen, the fingernail able to dumbly move over the touch-screen with only a very small hindrance, empower to writing text, selecting, drawing or moving windows. Fingernail is hardness and smoothness same like the top of a stylus that is because human fingernails contain of keratin and it wills not usually scratches or damage the touch-screen. In turn, it is available for a very short stylus top, which is able cunning correctly into end of the finger; this method will increasing the visibility of the appearance point on the touch-screen. (Prometheus Critical Studies in Innovation, 2007) Fingerprints Touch-screen able sustain from the issue of fingerprints on the appearance. This issue can be extenuate or prevent by using of staff with optical thins skin layout to mitigated the evident influence of fingers oils. For example, the oleophobic used to spreading in the iPhone 3GS, or by mitigated skin contact during using a finger nail or stylus. (Prometheus Critical Studies in Innovation, 2007) This is USB finger print which is using touch-screen technology. (Gabget Venue, 2009) Combined with Haptics Most users empirical with touch-screen which are dont have tactile feedback or tactual sensation can be a trouble depends on latencies or other method. Base on the research from University in Glasgow Scotland which are handle by Brewster, Chohan and Brown on 2007, the illustrate the specimen users deduct input error by 20%, increase data input speed by 20%, and minimize user acknowledge load by 40% during touch-screen are integrate with tactual sensation or tactual feedback. (Prometheus Critical Studies in Innovation, 2007) Gorilla Arm Base on the hacker slang dictionary, Jargon File, its define Gorilla Arm as the miscarriage to realize the ergonomics of perpendicular installed touch-screen for long time used. The advocate is that human body, arm held in a not supported standard location speedy turn into knackered and suffering, this call Gorilla Arm. It is usually citation as a surface evidence sample of what is not able to done in ergonomic. Perpendicular touch-screen still dictates in most system such as ATMs and data kiosks about the usage is also informality as an n ergonomics issue. Indisposed may be conformation by previously lousy position and shrivel of muscular system conformation by finite physics practice. Meticulous Art Printer is also a usually control the neck and shoulder painful depend on their position and the repeatability of their propulsion when they are painting. (Prometheus Critical Studies in Innovation, 2007) Touch Screen Mobile Phones Several years ago, everyone and their brother was talking about or playing with the Blackberry. It did not matter which make or model but people were simply intrigued by the features that Blackberry offered with its scrolling wheel, full qwerty keyboard, wide variety of applications available from the Handango store on the phone. However through the natural process of evolution, the world has become blessed with a new kind of phone, a phone which truly changes the world of mobile phones, we are blessed with the touch screen mobile phone. Originally the iPhone was the one and only phone out on the market which allowed users to use the power of their finger to control every aspect of the phone, rather than being imprisoned by a track wheel, or the newer more improved track ball. After the iPhone was originally released newer versions of the iPhone have come out in the 3G as well as the soon to come in the 3G S. These days however Apple is not the only company manufacturing these touch screen mobile phones, blackberry as well as several other notable phone companies have followed suit. If you asked a group of ten people which touch screen phone is the best, it is expected for the person to say the iPhone , unless of course they hold some sort of grudge against the phone due to the fact that is is currently only available on ATT. Regardless of your choice for the best touch screen phone on the market, you must always weight the pros and cons of each before you make a decision to buy or not to buy. Pros Simple to use, if you want to use it, touch it, and do the same if you are interested in closing it. Visually pleasing to look at. You never have to see the full keyboard that you are typing on, rather you are able to type onto the phone when you want to, in both upright and landscape modes. These days everyone and their brother is holding onto an iPhone the same way they used to hold onto Blackberries. The verdict? People arent using them for no reason, they are fun to use, and draw a certain amount of attention to the user. Cons The glass screen has the possibility of breaking even upon the slightest impact from a high distance. Odds are that if you are a person who is constantly dropping his or her phone, you should stay away from these touch screen phones, most of which do not offer insurance. The built in digital keyboard can be hard to get adjusted to especially if you are not used to typing on any sort of QWERTY keyboard. This is a quick fix for most, but it is something to think about if you are not comfortable with hitting imaginary buttons. Finally, these phones tend to be a bit more expensive than the other phones in their bracket, but the old adage stands true, you get what you pay for, and its recommended that you try one of the touch screen mobile phones out. At the end of the day, everyone has their own idea of a best phone, or the best phone carrier. However the one thing that everyone can agree on is the fact that these touch screen mobile phones are truly revolutionary and within the next five years we will not have any such phone that is not a touch screen. If you have been hesitant to make the jump so far, it is recommended that you head to your local phone retailer, and at least play around with these touch screen devices. Odds are, you will be pretty surprised with the results. http://hubpages.com/hub/Touch-Screen-Mobile-Phones Advantages and Disadvantages of touch Screen From the journal and the internet resource that I read, I founded some advantage and disadvantage of using touch-screen. The disadvantage for touch-screen device is it required a really big screen to avoid mistake when touching with human finger. Besides that, larger screen will bring low battery life effect. Normally touch-screen devices dont have any extra keys, such as iPhone. Therefore, when the application collapse but without collapse the OS, so user cant reach main menu when the screen is no response. Apart from that, touch-screen normally has lousy preciseness, QWERTY keyboards had known as an extra device. Most of the user-interface for touch-screen device is no optimization for thumb control, so user require and other device like stylus to control the application. User usually using their finger o touching the screen to control the touch-screen application, so this will make the screen get dirty and need to clean it up in certain time to prevent loss control. Lastly, touch-screen device require complex application to support, so it will slow down the response time and gain low battery life. The advantage for touch-screen is it has a large screen which giving a good view for web browsing, picture or movies. Apart from that, typically touch-screen application has a simple user-interface which is more intuitive. This will gain user easy understanding when using the touch-screen device. iPhone mobile which are develop by Mac Ins. Is a good example to represent simple user-interface. Lastly, each of the touch-screen devices has some button is able to smash down after using a few months or years. (John Popes, 2010) Conclusion Touch-screens have been around since the 60s. But it had just recently started to gain popularity and consumer markets. Nowadays, its pretty normal for most electronic devices, for example computer systems or entertainment systems to include a monitor. Users can interact it by using a mouse or keyboard to send input but with the implementation of this technology into these applications, it allows users to manipulate the systems through touching the monitor itself. Though the touch-screen technology contains some limitations, such as low precision when users use finger or the user must be within arms reach of the display, its user friendly, accurate, and easy to operate. With the implementation of touch-screens technology in different applications such as in the medical or military system, it will enhance the human machine interface experience. As the accuracy and intuitiveness of the screen increases, they will become even more common than they already are for the ease of use they provided. Proper development of this technology will surely bring a lot more benefits to users in near future. The touch-screen technology is keys to achieving and realizing e-navigation.

Antonio Vivaldi and the music of his time :: essays papers

Antonio Vivaldi and the music of his time Throughout history there have been many distinct periods of time. These various eras are all alike in a way because they all slowly flow into each other. One of these unique times was called the Baroque period. The Baroque time began during the 1600's and ended early during the early 1700's. The way Baroque music was looked at was varied depending on where you looked at it from. In Italy, it was largely energetic and spectacular. Yet, if you were to travel North, you would encounter the "gloom's of muted firelight." This, along with the "shadowy pales of another world," simply means that this music wasn't greatly appreciated in Southern Italy, as it was more towards the North. The people of the North were not as affectionate towards this type of music. Although, the more time that had passed in the 1600's, the more popular the baroque music became. It was greatly adored by the listeners. The beauty that this type of music contained was extremely astonishing. Also the drama in this type of music and theatre was what made this time stand out from the rest. The actual term "baroque" is extracted from "baroco" which is a name used by medieval philosophers to identify a reasoning that writers of the 16th century found absurd and pointless. On the contrary, Baroque music is far from being absurd or pointless. The word "baroque" is derived from that or from the word "barrochio" that is an Italian word used since the middle ages to indicate shifty or tricky procedures. Wherever it's beginnings, the word "baroque" had been used since the 18th century to indicate paintings, poems, architecture, literature, and all else that is dynamic, dramatic, and to some eyes, astonishing and incredibly even ugly. This really comes to a surprise to me because I've listened to baroque music like Antonio Vivaldi and Johann Sebastian Bach and none of the music struck me as being "ugly." The first word that came to mind when I was listening was "relaxing." Like all other music, there are some people that think higher of it then others. Sir Francis Bacon said, "^Ã…I cannot but be raised to this persuasion, that this third period of time will far surpass that of the Grecian and Roman learning^Ã…" After reading this quotation you can clearly see that Sir Francis Bacon thinks the Baroque time is far superior to the Grecian and Roman periods. Antonio Vivaldi and the music of his time :: essays papers Antonio Vivaldi and the music of his time Throughout history there have been many distinct periods of time. These various eras are all alike in a way because they all slowly flow into each other. One of these unique times was called the Baroque period. The Baroque time began during the 1600's and ended early during the early 1700's. The way Baroque music was looked at was varied depending on where you looked at it from. In Italy, it was largely energetic and spectacular. Yet, if you were to travel North, you would encounter the "gloom's of muted firelight." This, along with the "shadowy pales of another world," simply means that this music wasn't greatly appreciated in Southern Italy, as it was more towards the North. The people of the North were not as affectionate towards this type of music. Although, the more time that had passed in the 1600's, the more popular the baroque music became. It was greatly adored by the listeners. The beauty that this type of music contained was extremely astonishing. Also the drama in this type of music and theatre was what made this time stand out from the rest. The actual term "baroque" is extracted from "baroco" which is a name used by medieval philosophers to identify a reasoning that writers of the 16th century found absurd and pointless. On the contrary, Baroque music is far from being absurd or pointless. The word "baroque" is derived from that or from the word "barrochio" that is an Italian word used since the middle ages to indicate shifty or tricky procedures. Wherever it's beginnings, the word "baroque" had been used since the 18th century to indicate paintings, poems, architecture, literature, and all else that is dynamic, dramatic, and to some eyes, astonishing and incredibly even ugly. This really comes to a surprise to me because I've listened to baroque music like Antonio Vivaldi and Johann Sebastian Bach and none of the music struck me as being "ugly." The first word that came to mind when I was listening was "relaxing." Like all other music, there are some people that think higher of it then others. Sir Francis Bacon said, "^Ã…I cannot but be raised to this persuasion, that this third period of time will far surpass that of the Grecian and Roman learning^Ã…" After reading this quotation you can clearly see that Sir Francis Bacon thinks the Baroque time is far superior to the Grecian and Roman periods.